Furan fatty acid concentrations in tea infusions prepared from green,black, and herbal teas

Furan fatty acids (FuFAs) are valuable antioxidants with highly effective radical scavenging properties which are widely distributed at low levels in food. Previous research indicated that tea is a valuable source of FuFAs. However, tea is only consumed in form of infusions. To fill this gap, we prepared infusions from different herbal, green, and black teas. Initial measurements with GC-MSMS of tea verified previous findings that 11-(3,4-dimethyl-5-penylfuran-2-yl)-undecanoic acid (11D5) was the prevalent FuFA in tea matrix. Therefore, 11D5 was quantified in tea infusions by means of UHPLC-MSMS equipment after mild alkaline hydrolysis. While herbal tea infusions were low or free of FuFAs, 11D5 was detectable in all samples of green and black tea infusions. Amounts of 11D5 were higher in green tea than in black tea. Moreover, Darjeeling tea infusions were by ~30% richer in 11D5 than black and green teas from other regions. Each cup of green and black tea infusion may provide 20–60 μg 11D5, which is about 5% of the amounts found in tea samples. Spread over the day, regular tea consumption may contribute to the intake of valuable FuFAs.     

基于跨临界CO2热泵的茶叶生产能源系统负荷削减潜力

乡村产业中的化石能源设备逐渐被电能技术替代，引起了乡村负荷波动增大、部分时段产生集中高负荷的问题。为了解决以上问题，将低品位清洁能源应用至乡村的茶叶生产中，针对烘茶全过程的工艺要求提出了跨临界CO₂热泵烘茶技术；并以某茶叶生产乡村为对象，对其代表台区的全年日用电量及产茶日负荷进行了分析，得出采用CO₂热泵烘茶后其负荷得到大幅度削减，整体可降低至原负荷的39.6%~46.8%，峰值负荷与平时负荷的比值由原本的13.6降至5.4~6.2。跨临界CO₂热泵应用至农产品生产中可有效缓解乡村供电压力。     

基于魅力工学的传统器物设计评价应用研究

目的 在传统器物的创新设计中,最重要的环节是了解消费者对所使用产品的不同感受与意向并转换为具体的设计要素.研究消费者心理的感性因素与传统器物设计元素之间的联系,确定设计要素,从而对产品进行创新设计,为提升传统器物附加值作出贡献.方法 以中国传统器物茶宠为例,首先对8位相关的茶宠专家进行访谈,通过魅力工学中的评价构造法整理并提取魅力因子,设计出问卷调查表;然后以访谈内容为依据,使用问卷调查法得到大众对茶宠的魅力评价,共回收84份有效问卷;最后应用数量化一类分析茶宠魅力因子影响权重.结果 得到了数量化一类统计表,选取了其中影响因素较大的魅力因子作为茶宠设计前的风格定调考量.结论 通过茶宠的研究案例证明了该理论的可行性,为未来传统器物的设计提供了更多元且新颖的设计依据.     

不同水分工夫红茶贮藏过程中主要内含成分及感官品质变化研究

目的研究不同水分工夫红茶贮藏品质变化规律,为工夫红茶贮藏的适宜水分条件提供理论参考。方法系统比较不同水分工夫红茶(国家标准范围内)在自然贮藏条件下其主要内含成分及感官品质的变化。结果 1年贮藏期内,初始水分含量越低,含水率增长速度越快,总体上,茶叶初始水分含量高低决定贮藏过程中水分的高低。在短期贮藏(≤6月)时含水量越高的红茶中茶多酚、水浸出物保留量越多;长期贮藏(6月)时水分较低的红茶中茶多酚、水浸出物保留量越多。咖啡碱、可溶性糖在短期贮藏(≤6月)中水分含量适中的红茶中下降速度越慢;长期贮藏(6月)含水量较高的保留量越高。氨基酸含量在含水量越低的红茶中越高。初始水分含量高的红茶L*、a*、b*值均稍高于水分低的红茶。结论从综合品质的变化来看,本实验中以处理3含水率为5.93%的处理最好,处理2含水率为4.1%次之,处理1含水率为2.33%最差。     

介孔分子硅剂改善茶浓缩膜结构特性应用研究

为有效提高功能性茶浓缩反渗透膜的回收效率和抗污性能,探究了3种介孔分子硅材料(MCM-41、SBA-15和MCFs)对浓缩膜面聚酰胺层聚合形成过程的结构影响。结果表明,添加质量分数0.02%经磺化预处理的MCM-41于间苯二胺水相可接枝酰氯基团,形成的聚酰胺结构层峰谷粗糙跨度仅为220 nm且交联紧致,膜抗拉伸强度增加37.8%;SBA-15和MCFs相膜面峰谷跨度达500~780 nm,横向褶皱和团聚,结构存在孔道塌陷;改性膜在3 h内对茶多酚、茶多糖、茶蛋白即可达到最大浓缩度,减少50%浓缩时间;MCM-41和SBA-15膜长时间运行的浓缩降率仅为2.8%~6.1%,48 h下降率比显示改性膜达标使用时长增加112.5%~137.5%,亲水性和抗污堵能力均大幅提升,可有效满足功能化茶浓缩精度。     

Influence of teaware on subjective ratings of,and taste expectations concerning,tea

Two studies were conducted in order to investigate the influence of teaware on consumers’ subjective ratings of, and taste expectations concerning, one of the world’s most popular beverages, namely tea. In Study 1, 100 Chinese participants and 100 participants from the USA viewed online photographs of Chinese brand and British brand green tea presented in either Chinese or British tea sets. The participants then rated their feelings about, taste expectations concerning, and willingness-to-pay for, each cup of tea. In Study 2, 65 Chinese participants also viewed these photos with either a high or low price label for each cup of tea. The results of both studies consistently revealed that the teaware influenced Chinese participants’ bitterness and astringency ratings concerning their tea expectations; whereas no such effects were found for the USA participants. Moreover, the teaware also influenced Chinese participants’ pleasantness ratings of tea when no price information was provided, but not when price information was presented. Collectively, these findings highlight the influence of the visual appearance of the receptacle on the subjective ratings of, and taste expectations concerning, tea. These results also compare the influence of product-extrinsic and contextual cues on consumers’ taste expectations.     

服装设计中茶艺元素的创新与应用

茶艺是我国传统文化的重要组成部分,在我国有着悠久的历史。现代社会弘扬传统文化,也为茶艺文化的发展创新带来了新的繁荣,茶艺受到国内外许多人士的喜爱。而茶艺元素也被广泛应用于服装设计中,现代服装设计与传统茶文化的融合,使得传统文化焕发新的生机。文章主要分析了服装设计中如何更好地运用茶艺元素。     

Tea components influencing bioavailability of fluoride and potential transport mechanism in the Caco-2 cell line model

Previous work showed that the bioavailability of fluoride in dark tea was lower than NaF solution. However, limited information is available indicating the effects of tea components on the fluoride bioavailability. In this study, the effects of the components in tea on the bioavailability of fluoride were evaluated in the Caco-2 cell line model. Additionally, the mechanism of effect of aluminium on fluoride transport was investigated. The result showed that 10–100 μm of epigallocatechin gallate (EGCG) could not influence fluoride transport. Al³⁺ significantly decreased fluoride transport in both apical-basolateral and basolateral-apical directions. Moreover, aluminium could form different forms of aluminium fluoride complexes, which were transported through Caco-2 cells by different pathways. F⁻ transport was mainly dependent on the paracellular pathway and active transport involving Cl⁻ channels. The paracellular pathway played a predominant role in transport of AlF₃. The paracellular pathway and active transport both participated in AlF₂⁺ transport.     

The influence of different water types and brewing durations on the colloidal properties of green tea infusion

Green tea infusions were prepared with three different water types: distilled water, commercial mineral water and CaCl₂ added distilled water (at 20 mg L^?1). The impact of different water type on the colloidal particle parameters, namely size, polydispersity index (PDI) and zeta potential, was examined within 24 h. Our results indicate that distilled water green tea infusion (DWT) brewed at 80 °C for 5 min contained the smallest particles (242.17 ± 11.78 nm) as examined by dynamic light scattering (DLS). Moreover, DWT showed smaller size increase during the 24 h storage than that of mineral water tea and CaCl₂ added water tea infusion. The morphology characteristics of green tea infusion particles were visualised by transmission electron microscope (TEM) which revealed that green tea infusion particles had heteromorphic shapes. Our results suggest that mineral composition of water impacts the colloidal size and stability of green tea infusion. Additionally, DLS and TEM could be useful tools to provide colloidal information which is important to understand quality characteristics of green tea infusion during processing and storage.